In this guide
Related guides
Put each quote next to this list and tick what it states clearly. A missing item is not always a bad sign, but it is always a question to ask before you sign.
The cable and the parts
- The cable category and type are written clearly, for example Cat6A U/UTP LSZH.Without it you cannot compare quotes or check what was installed.
- The cable is solid copper, not CCA (copper-clad aluminium).Many contractors do not make this clear. CCA does not meet the standards and is risky with PoE.
- All parts come from one manufacturer's system.Mixing parts can lower performance and can affect the system warranty.
The scope
- The number of points and their locations, according to the drawing.So nothing is missed and every point is where you need it.
- The pathways: trunking, conduits and cable trays.Pathways keep network cables separated from other sources of interference.
- The rack, patch panels and cable management inside the rack.A tidy rack makes maintenance, and adding or removing devices, much easier.
- What is not included: civil works, ceilings, electrical work and so on.So you know what you still need to arrange or pay for.
Quality and handover
- Every point is tested with a certification tester, and you receive the report.The report gives the details of every cable, and if there is a fault it shows where.
- Cables are labeled at both ends.Unclear labels make maintenance slow and difficult.
- As-built drawings are delivered at handover.You will need them for every future change or expansion.
- A schedule with clear delivery stages.So you can plan the move and your team around it.
After handover
- The warranty: how long, and who covers what (contractor and manufacturer).Know who to call, and for how long you are covered.
- Support after handover and the response time.After-sales service is one of the most important points for any client.
- The contractor's experience and similar projects.Ask to see work like yours.
Printed from nc-solution.net/guides/compare-cabling-quotes
